Normally Closed Brass Solenoid Valve NPT thread 1 inch 24VDC with NBR seal suitable for Water , Gas & Air - Direct Acting Valve
ACECREW is a trusted supplier of Solenoid Valves for Industrial needs and small business operations. All our Valves meet industrial standards and are made with high-quality components for durable use.
Components of our Brass Solenoid Valves include :
- Forged solid brass that is corrosion resistant with solid construction
- 2 choices of Seal available - NBR Buna-N, Perbunan nitrile rubber and FKM/VITON fluoro rubber material.
- Solenoid Valves with NBR seal or FKM/VITON seal are suitable for low viscosity fluids and general purpose applications
- VITON Seal valves are more suitable for high solvent content use such as gasoline and higher resistance to heat of media temperature range of 15-250 °F (-10 to 120 °C) .
- Valve operating temperature range of 15-125 °F (-10~50 °C)
- Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
- Our Valves follows National Standards for pipe thread in the U.S.A.
- Coil terminals are not polarity sensitive
- PLEASE NOTE : This is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
HIGHLIGHT
| Body Material | Forged high-quality solid brass |
| Operation Mode | N/C (normally closed) |
| Pipe Size | 1" NPT |
| Voltage | 24 VDC |
| Diaphragm Seal Material | NBR |
MECHANICAL
| Operation Type | 2-way 2-position direct lift diaphragm |
| Operation Mode | Normally closed (valve opens when the coil is engaged) |
| Pipe Size | 1" NPT female (11-1/2 TPI) |
| Orifice Diameter | 1" (25 mm) |
| Flow Rate | Cv=12 |
| Flow Direction | Unidirectional (flow the arrow on valve body) |
| Media | Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (DO NOT use with gasoline.) |
| Operating Pressure Differential | 0-145 psi (0-1 MPa, gravity-feed capable) |
| Operating Temperature | 15-125 °F (-10~50 °C) |
| Media Temperature | 15-180 °F (-10~80 °C) |
| Dimensions | See product diagrams |
| Weight | 2 lb 4 oz |
ELECTRICAL
| Voltage | 24 VDC |
| Current | 1 Amp |
| Wattage | 24 Watt |
| Coil | Copper wire in resin-molded casing |
| Connectors | DIN 43650-A |
MATERIAL
| Body | Brass |
| Insert | Stainless steel (plunger, spring, etc.) |
| Seal | NBR (Buna-N, Perbunan, and Nitrile rubber) |
| Diaphragm | NBR (fiber-reinforced) |