Brass Solenoid Valve NO 1 inch NPT 220VAC, 240VAC Normally Open for Water, Air & Gas
Brass Solenoid Valve NO 1 inch NPT 220VAC, 240VAC Normally Open for Water, Air & Gas
MAXIMUM OPERATING PRESSURE DIFFERENTIAL 145 psi SOLENOID VALVE
2 way Solenoid Valve Normally Open HVAC projects
NBR Nitrile rubber Seal Valve suitable for  fuel hoses, gaskets, rollers, and other products in which oil resistance is required.
High Quality Brass Valve with higher resistance to chemical component
2 Way Solenoid Valve with unidirectional flow
Solenoid Valve NBR Seal Good resistance to compression
ACECREW ELECTRIC SOLENOID VALVE COMPONENTS
Non polarity sensitive coil Solenoid Valve
Brass Solenoid Valve NO 1 inch NPT 220VAC, 240VAC Normally Open for Water, Air & Gas
Brass Solenoid Valve NO 1 inch NPT 220VAC, 240VAC Normally Open for Water, Air & Gas
Brass Solenoid Valve NO 1 inch NPT 220VAC, 240VAC Normally Open for Water, Air & Gas

Brass Solenoid Valve NO 1 inch NPT 220VAC, 240VAC Normally Open for Water, Air & Gas

Regular price
$58.99
Sale price
$58.99

NORMALLY OPEN 1 INCH , 220VAC/230VAC/240VAC BRASS SOLENOID VALVE - NBR SEAL - SUITABLE FOR WATER , GAS & AIR - DIRECT ACTING VALVE

ACECREW is a trusted supplier of Solenoid Valves for Industrial needs and small business operations. All our Valves meet industrial standards and are made with high-quality components for durable use.

Components of our Solenoid Valves include :

  • Forged solid brass that is corrosion resistant with solid construction to weather changes of temperatures
  • 2 choices of Seal include NBR Buna-N, Perbunan nitrile rubber AND FKM/VITON fluoro rubber material. Solenoid Valves with either NBR seal or FKM/VITON seal are suitable for low viscosity fluids and general purpose applications, with both NBR seal Valve and FKM/VITON seal Valve operating temperature range of 15-125 °F (-10~50 °C)
  • VITON Seal valves are more suitable for high solvent content use such as gasoline and higher resistance to heat of media temperature range of 15-250 °F (-10~120 °C) .
  • ACE CREW brass Solenoid Valves Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Our Valves follows National Standards for pipe thread in the U.S.A. We use NPT.
  • Coil terminals are not polarity sensitive
  • PLEASE NOTE : This is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.

HIGHLIGHT

Body Material Forged high-quality solid brass
Operation Mode N/O (normally open)
Pipe Size 1" NPT
Voltage AC 220V~240V
Diaphragm Seal Material NBR

 

MECHANICAL

Operation Type  2-way 2-position direct lift diaphragm
Operation Mode Normally open (valve closes when the coil is engaged)
Pipe Size 1" NPT female (11-1/2 TPI)
Orifice Diameter 1" (25mm)
Flow Rate Cv=12
Flow Direction Unidirectional (flow the arrow on valve body)
Media Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (DO NOT use with gasoline.)
Operating Pressure Differential 0-145 psi (0-1 MPa, gravity-feed capable)
Operating Temperature 15-125 °F (-10~50 °C)
Media Temperature 15-180 °F (-10~80 °C)
Dimensions See product diagrams
Weight 3 lb 6 oz

 

ELECTRICAL

Voltage AC 220V~240V 
Current 0.1 Amp
Wattage 24 Watt
Coil Copper wire in resin-molded casing
Connectors DIN 43650-A

 

MATERIAL

Body Brass
Insert Stainless steel (plunger, spring, etc.)
Seal NBR (Buna-N, Perbunan, and Nitrile rubber)
Diaphragm NBR (fiber-reinforced)