Brass Solenoid Valve Viton Normally Closed 1/2 inch 24vdc with FKM seal suitable for water, gas & air - Direct Acting Valve
ACECREW is a trusted supplier of Solenoid Valves for Industrial needs and small business operations. All our Valves meet industrial standards and are made with high-quality components for durable use.
- Components of our Solenoid Valves include : Forged solid brass that is corrosion resistant with solid construction to weather changes of temperatures
- 2 choices of Seal include NBR Buna-N, Perbunan nitrile rubber AND FKM/VITON fluoro rubber material. Solenoid Valves with either NBR seal or FKM/VITON seal are suitable for low viscosity fluids and general purpose applications, with both NBR seal Valve and FKM/VITON seal Valve operating temperature range of 15-125 °F (-10~50 °C)
- VITON Seal valves are more suitable for high solvent content use such as gasoline and higher resistance to heat of media temperature range of 15-250 °F (-10~120 °C) .
- ACE CREW brass Solenoid Valves Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
- Our Valves follows National Standards for pipe thread in the U.S.A. We use NPT.
- Coil terminals are not polarity sensitive
- PLEASE NOTE : This is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
HIGHLIGHT
Body Material | Forged high-quality solid brass |
Operation Mode | N/C (normally closed) |
Pipe Size | 1/2" NPT |
Voltage | DC 24V |
Diaphragm Seal Material | VITON/FKM |
MECHANICAL
Operation Type | 2-way 2-position direct lift diaphragm |
Operation Mode | Normally closed (valve opens when the coil is engaged) |
Pipe Size | 1/2" NPT female (14 TPI) |
Orifice Diameter | 19/32" (15mm) |
Flow Rate | Cv=4.5 |
Flow Direction | Unidirectional (flow the arrow on valve body) |
Media | Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, gasoline, low viscosity fluid, etc. |
Operating Pressure Differential | 0-145 psi (0-1 MPa, gravity-feed capable) |
Operating Temperature | 15-125 °F (-10~50 °C) |
Media Temperature | 15-250 °F (-10~120 °C) |
Dimensions | See product diagrams |
1Weight | 1 lb 6 oz |
ELECTRICAL
Voltage | DC 24V |
Current | 1 Amp |
Wattage | 24 Watt |
Coil | Copper wire in resin-molded casing |
Connectors | DIN 43650-A |
MATERIAL
Body | Brass |
Insert | Stainless steel (plunger, spring, etc.) |
Seal | VITON (FKM/FPM, fluorocarbon) |
Diaphragm | VITON (fiber-reinforced) |