VITON NORMALLY CLOSED 3/8 INCH NPT , 12VDC BRASS SOLENOID VALVE - FKM SEAL - SUITABLE FOR WATER , DIESEL GAS & AIR - DIRECT ACTING VALVE
ACECREW is a trusted supplier of Solenoid Valves for Industrial needs and small business operations. All our Valves meet industrial standards and are made with high-quality components for durable use.
Components of our Solenoid Valves include :
- Forged solid brass that is corrosion resistant with solid construction to weather changes of temperatures
- 2 choices of Seal include NBR Buna-N, Perbunan nitrile rubber AND FKM/VITON fluoro rubber material. Solenoid Valves with either NBR seal or FKM/VITON seal are suitable for low viscosity fluids and general purpose applications, with both NBR seal Valve and FKM/VITON seal Valve operating temperature range of 15-125 °F (-10~50 °C)
- VITON Seal valves are more suitable for high solvent content use such as gasoline and higher resistance to heat of media temperature range of 15-250 °F (-10~120 °C) .
- ACE CREW brass Solenoid Valves Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
- Our Valves follows National Standards for pipe thread in the U.S.A. We use NPT.
- Coil terminals are not polarity sensitive
- PLEASE NOTE : This is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
HIGHLIGHT
Body Material | Forged high-quality solid brass |
Operation Mode | N/C (normally closed) |
Pipe Size | 3/8" NPT |
Voltage | DC 12V |
Diaphragm Seal Material | VITON/FKM |
MECHANICAL
Operation Type | 2-way 2-position direct lift diaphragm | |
Operation Mode | Normally closed (valve opens when the coil is engaged) | |
Pipe Size | 3/8" NPT female (18TPI) | |
Orifice Diameter | 1/5" (5mm) | |
Flow Rate | Cv=0.71 | |
Flow Direction | Unidirectional (flow the arrow on valve body) | |
Media |
|
|
Operating Pressure Differential | 0-145 psi (0-1 MPa, gravity-feed capable) | |
Operating Temperature | 15-125 °F (-10~50 °C) | |
Media Temperature | 15-250 °F (-10~120 °C) | |
Dimensions | See product diagrams | |
Weight | 15 oz |
ELECTRICAL
Voltage | 12 VDC |
Current | 2 Amp |
Wattage | 24 Watt |
Coil | Copper wire in resin-molded casing |
Connectors | DIN |
MATERIAL
Body | Brass |
Insert | Stainless steel (plunger, spring, etc.) |
Seal | VITON (FKM/FPM, fluorocarbon) |
Diaphragm | VITON (fiber-reinforced) |